Open the STEP. It handles the rest.
Feature recognition, automatic operations, smart fixturing, collision checking with real models and machine-ready G-code. One workflow, one program.
Drop in the model. It reads the rest.
The moment you open the STEP file, the profile section, length and end cuts are resolved. Every hole, pocket, slot, notch and feature on angled faces is found one by one.
- Round, elliptical and free-form profile sections
- Mitre cuts, multi-wall holes, end notches
- Including features on angled faces
- Unrecognised regions are reported; the original STEP is never altered
The right tool and the right order for every feature.
An operation is created for every recognised feature and a suitable tool is assigned from the tool library. Saw and mill are compared and the most efficient method is suggested. The order respects tool changes, A angle and travel distance; drag and drop to change it yourself.
It builds automatically.
You have the final say.
Position, size, tool and order of every operation are edited in one panel; the 3D view updates instantly.
No STEP?
A DXF will do.
Take the profile section from a DXF or a ready template. Circles and contours in the drawing become operations in one go; selected operations export back to DXF.
Vises, stages and support shoes set themselves up.
Vises are placed automatically clear of the operations; for a conflicting operation the vises are shifted and a new stage is opened. Male-female support shoes are generated from the profile section, each delivered as its own STEP. You can also import STEP models of your own machine, vises and shoes.
- Automatic staging: collision checking has the final word
- Import machine / vise / shoe STEP
- Fixed / moving jaw, bottom / top shoes: STEP output
- Left / right stops, no-go zones, machine X limit
Don’t draw the shoes.
Let the program do it.
Fixed-jaw, moving-jaw and bottom shoes (the male-female counterpart of the profile) are generated from the section and clamping layout. A separate STEP file per profile, straight to production.
Your own machine.
Your own vises.
Load your machine assembly as STEP and assign a role to each part. Collision checking uses the real model of your machine, not boxes.
If it hits a vise,
a new stage opens.
Vises are placed where they don’t clash with operations; for a conflicting operation they are shifted and a new stage is opened. Collision checking always has the final word.
See the mistake on screen, not on the machine.
Tool, holder, head, vises, shoes and stops are checked with their real models. Every operation is shown cut into the profile. No G-code is produced from a program with a collision.
- Collision intervals are marked red on the timeline
- Moves inside and outside operations are checked separately
- Total time estimate: tool changes, rapids, cutting
- Externally opened G-code is simulated too
If it’s not sure,
there’s no G-code.
The same rules apply to generating, saving and sending NC, to shortcuts and to the command line. No exceptions.
Every line has a reason.
The explained post shows which rule wrote each NC line, why, and how it was calculated. G/M codes, templates and custom rules are edited without coding.
Say it,
it’s added.
F2 and speak. The program asks for the face, operation and dimensions in turn; you answer out loud (speech recognition is currently Turkish) and the part updates after every answer. Works offline.
ALUNEXT CADCAM in two and a half minutes.
From STEP to G-code: the whole workflow in 12 chapters. (Video narration on screen is in Turkish.)
Why ALUNEXT CADCAM?
Born from every problem a profile-machining machine builder faces on the shop floor. A CAM that accounts for vises, shoes, stages and the machine itself.
Hole breakthrough
For holes through opposite walls, only the walls are cut at feed rate; the gap in between is crossed fast. Webs are recognised automatically.
Smart moves over obstacles
Every G0 move is checked against the profile, jaws and shoes; if needed the tool lifts vertically and passes over the obstacle.
No-exception safety
NC is not generated, saved or sent until the collision check passes. No G-code either if an axis is out of limits or a tool is unmeasured.
No operation is dropped
Everything in the STEP becomes an operation and the 3D is compared with the STEP. The machined part is written as STEP on every change.
From drawing to chips in six steps.
Every step runs automatically, and at every step you have the final say.
STEP
Open the file; section and length are resolved.
Recognition
Holes, pockets, slots, notches are found.
Operations
Tools assigned, order set.
Fixturing
Vises, stages, shoes.
Simulation
Collision and time checks.
G-code
Save or send to the machine.
Everything you expect from a profile CAM and more.
Plus a few things you might not expect.
Automatic machining from STEP
Open the profile model; features are recognised, operations created, tools assigned. You just review.
- Round, elliptical, free-form sections; mitred and multi-wall profiles
- Feature recognition including angled faces and end notches
- Full-length notches merged into a single operation
- Deleted operations wait in a bin and come back in one click. The original STEP is preserved.
Saw or mill?
For rectangular operations the saw blade is tried too: clearing, slot following, straight and mitre cuts. Compared, and the best is suggested.
Rich operation types
- Circle, rectangle, keyhole
- C and L milling, spot drilling
- Custom contour: 2D CAD editor
- Formula positions, clone, mirror
Sections and operations from DXF
Take the section from a DXF or a template (box, tube, L, U, T); add the DXF’s circles and contours to the selected face as operations.
Smart fixturing
Automatic vise placement, long-part splitting, stages, left / right stops. No stage limit with servo vises.
Support shoes
Fixed / moving jaw and bottom / top shoes (the male-female counterpart of the profile) are generated automatically from the section and clamping layout. Delivered as a separate STEP file per profile, ready for production.
Collisions with real models
No box approximations: vise bodies, jaws, shoes, stops, table, head, holder and tool are checked with the meshes you see on screen. If there is a collision, there is no G-code.
Tool management
- Realistic tools and holders
- Magazine pockets, loaded tool
- Tool measurement, dimensioned tool drawings
- Saw blade and angle head
Explained post
- The reason and math behind every NC line
- Editable G/M codes and templates
- Custom rules: before / after operations
- G54 and other work offsets
Outputs
- A3 technical drawing (PDF), dimensioned
- Machined STEP, DXF export
- Detailed time estimate
- Monthly activity log
Voice input and command line
Press F2 and speak: the program asks for the face, operation and dimensions and you answer (speech recognition is currently Turkish). Works offline. For keyboard lovers: an AutoCAD-style command line and custom shortcuts.
Licensing and permissions
Machine-locked, modular licences: time-limited, perpetual or trial. Every button and operation type can be tied to a permission level. Interface in six languages: Türkçe, English, 中文, Русский, العربية, Italiano.
Clean code means a ready drawing.
When G-code is generated without errors or collisions, an A3 technical drawing is created automatically with part views, X / Y / Z ordinate dimensions to operations and an operation table.
- Cutting (interpolation)
- Rapid moves
- Tool changes
- Vises / start-up
One program, three machines.
Choose your machine’s axis count; tool types and operations are enabled or disabled accordingly. The program warns you in advance about unreachable operations.
Top-face machining
Vertical head. All holes, pockets and slots on the top face.
Head tilt with A
Top, front, back and angled faces in one setup. More with an angle head and saw blade.
C + tilt axis
Parametric head definition: different head designs, dimensioned setup page.
See it with your own profile.
Bring one of your STEP files; we’ll show the whole flow, from recognition to G-code, on your own part.